With split system air conditioning, the indoor unit is separated from the outdoor components or else the condenser. Split simply means separation and therefore the condenser is placed in a convenient place on the outside either on the ground or hanged up on the walls. In large buildings they are positioned in groups but each has its own features depending on the model.
The air conditioners are designed differently and come in a number of sizes. In order to chose the right size one must consider some vital factors like the size of the room and the total number of inside units required. The air conditions of a single room are comfortably regulated by one unit.
With this technique of temperature regulation, copper connection pipes and electrical wires are used to link the condenser to the indoor unit. A refrigerant gas is pumped through the compressor from a condenser coil to the indoor units via the pipe connections. Fan is used to distribute cold air across evaporator coils.
With this technique the amount of cold air getting in a room can be regulated using infra red remotes or thermostats. Each room within the building is designed to maintain a different temperature from others. Residential houses have embraced the method as the sitting room and the bedroom can be conditioned at different times.
This technique is currently being employed to regulate temperatures in big retail shops, hospitals, institutions of higher learning, supermarkets and several other areas. The siting room can be conditioned during the day and the bedroom at night. Since decent buildings demand more space which might not be available, exceptional and modular purpose offices might be installed.
The split air conditioners work great as the condenser can be located outside the office and wires with connection pipes be run into the room. The ceiling units or inside wall are extra cost effective as they distribute air with precision. The system can be installed in several places since with it no duct work or distribution techniques are required.
In split system air conditioner, the condenser can even be positioned outside the office and connection pipes be run to the room. Air is distributed in the room through then ceiling units or pipes which are fitted on the walls. This technique does not require much duct work or distribution knowledge and because of this it can be installed in a number of areas.
The air conditioners are designed differently and come in a number of sizes. In order to chose the right size one must consider some vital factors like the size of the room and the total number of inside units required. The air conditions of a single room are comfortably regulated by one unit.
With this technique of temperature regulation, copper connection pipes and electrical wires are used to link the condenser to the indoor unit. A refrigerant gas is pumped through the compressor from a condenser coil to the indoor units via the pipe connections. Fan is used to distribute cold air across evaporator coils.
With this technique the amount of cold air getting in a room can be regulated using infra red remotes or thermostats. Each room within the building is designed to maintain a different temperature from others. Residential houses have embraced the method as the sitting room and the bedroom can be conditioned at different times.
This technique is currently being employed to regulate temperatures in big retail shops, hospitals, institutions of higher learning, supermarkets and several other areas. The siting room can be conditioned during the day and the bedroom at night. Since decent buildings demand more space which might not be available, exceptional and modular purpose offices might be installed.
The split air conditioners work great as the condenser can be located outside the office and wires with connection pipes be run into the room. The ceiling units or inside wall are extra cost effective as they distribute air with precision. The system can be installed in several places since with it no duct work or distribution techniques are required.
In split system air conditioner, the condenser can even be positioned outside the office and connection pipes be run to the room. Air is distributed in the room through then ceiling units or pipes which are fitted on the walls. This technique does not require much duct work or distribution knowledge and because of this it can be installed in a number of areas.
About the Author:
Frost Air Conditioning Sydney supply and install split system air conditioners since 1971 so click here for the latest a/c systems and installation specials.
No comments:
Post a Comment